Autonics TZ4W Series Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Autonics TZ4W Series. Autonics TZ4W Series 17 pagina's. Dual pid control temperature controller
Ook voor Autonics TZ4W Series: Handmatig (4 pagina's), Gebruiksaanwijzing (2 pagina's), Handmatig (16 pagina's), Handmatig (16 pagina's), Handmatig (17 pagina's)

Pagina afdrukken
Autonics TZ4W Series Handmatig

Specifications

TZ4SP
Series
TZN4S
100-240VAC 50/60Hz
AC Power
Power
supply
※ 1
AC/DC Power
24VAC 50/60Hz / 24-48VDC
Allowable voltage range
90 to 110% of rated voltage
AC Power
Max. 5VA(100-240VAC 50/60Hz)
Power con-
sumption
※ 1
Max. 8VA(24VAC 50/60Hz), Max. 7W(24-48VDC)
AC/DC Power
Display accuracy
7 Segment (PV: red, SV: green) LED method
TZ4SP:
4.8×7.8mm
Character size(W×H)
TZN4S:
PV:7.8×11.0mm
SV:5.8×8.0mm
RTD
DPt100Ω, JPt100Ω, 3wire (allowable line resistance max. 5Ω per a wire)
Input
Thermocouple
K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT) (allowable line resistance max. 100Ω)
type
Analog
1-5VDC, 0-10VDC, DC4-20mA
250VAC 3A 1c
Relay
Control
12VDC ±3V 30mA Max.
SSR
output
Current
DC4-20mA (load 600Ω Max.)
PV transmission -
EVENT1
250VAC 1A 1a
Sub
output
-
EVENT2
Communication -
ON/OFF, P, PI, PD, PIDF, PIDS control
Control type
F.S. ±0.3% or 3℃, select the higher one
Display accuracy
Setting method
Front push buttons
1~100℃(0.1 to 100.0℃) variable(ON/OFF control)
Hysteresis
ALARM output
Adjustable ON/OFF 1 to 100 (0.1 to 100.0)℃ of alarm output
0.0 to 100.0%
Proportional band (P)
Integral time (I)
0 to 3600 sec.
0 to 3600 sec.
Derivative time (D)
Control period (T)
1 to 120 sec.
0.5 sec.
Sampling period
1 to 999 sec.
LBA setting
RAMP setting
Ramp Up, Ramp Down at 1 to 99min.
Dielectric strength
2,000VAC 50/60Hz for 1min. (between power source terminal and input terminal)
Vibration
0.75mm amplitude at frequency of 10 to 55Hz(for 1min.) in each of X, Y, Z direction for 2 hours
Mechanical: Min. 10,000,000 operations, Electrical: Min. 100,000 operations(250VAC 3A resistive load)
Main output
Relay
life cycle
Sub output
Mechanical: Min. 20,000,000 operations, Electrical: Min. 500,000 operations(250VAC 1A resistive load)
Insulation resistance
Min. 100MΩ (at 500VDC megger)
±2kV the square wave noise (pulse width: 1us) by the noise simulator
Noise resistance
Memory retention
Approx. 10 years (when using non-volatile semiconductor memory type)
Ambient temperature -10 to 50℃, storage: -20 to 60℃
Environ-
ment
Ambient humidity
35 to 85%RH, storage: 35 to 85%RH
Approval
TZ4SP:
Approx. 136g
Unit weight
TZN4S:
Approx. 150g
※1. AC/DC power type is only for TZ4SP, TZ4ST, TZN4M, TZ4L Series.
※ Environment resistance is rated at no freezing or condensation.
Dual PID Auto Tuning Control
TZ4M
TZ4ST
TZN4M
Max. 6VA(100-240VAC 50/60Hz)
TZ4M:
PV:9.8×14.2mm
SV:8.0×10.0mm
4.8×7.8mm
TZN4M:
PV:8.0×13.0mm
SV:5.0×9.0mm
DC4-20mA (load 600Ω Max.)
250VAC 1A 1a
-
RS485(PV/SV transmission, SV setting)
Approx. 136g
Approx. 270g
TZ4W
TZ4H
TZN4W
TZN4H
TZ4H:
3.8×7.6mm
8.0×10.0mm
TZN4H:
PV:7.8×11.0mm
SV:5.8×8.0mm
TZ4W:
Approx. 270g
Approx. 259g
TZN4W:
Approx. 259g
(A)
Photo
electric
sensor
TZ4L
TZN4L
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
PV:9.8×14.2mm
SV:8.0×10.0mm
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
mode power
supply
(Q)
Stepper
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other
Approx. 360g
H-73