909 P3059 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 909 P3059. 909 P3059 16 pagina's.
Pagina afdrukkenEven when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool's construction and design:
•
Contact with the disc.
•
Kickback of workpiece and parts of workpiece.
•
Disc fracture.
•
Catapulting of disc pieces.
•
Damage to hearing if effective earmuffs are not worn.
•
Harmful emissions of grinding dust when the machine is
used in closed rooms.
•
Do not use discs that are deformed or cracked.
•
Always remove the plug from the mains socket before
making any adjustments or maintenance, including
changing the disc.
Accessories
The 909 P3059 chop saw is supplied with the following
accessories as standard
1. 8mm Hex key
2. 6mm Hex key
3. Vise handle
4. Screw, spring washer and flat washer for vise handle
5. 355mm Cut off disc (fitted)
6. Rubber feet (x4)
7. Instruction manual
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
1. Remove all loose parts from the carton.
2. Remove the packing materials from around the saw.
3. Carefully lift the saw from the carton and place it on a
level work surface.
4. The saw has been shipped with the saw arm locked in
the down position. To release the saw arm, push down
on the top of the saw arm, and pull the lock down knob
outwards.
5. Slowly lift the saw arm.
Assembly
The 909 chop saw is packed fully assembled, except for
the vise handle.
6