909 RC1200 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 909 RC1200. 909 RC1200 12 pagina's.
Pagina afdrukken4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
The correct power tool will
Properly
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety rules for reciprocating saws
Always remove the plug from the mains socket before
•
making any adjustments or maintenance, including
changing the blade.
•
When operating the saw, use safety equipment including
safety goggles or shield, ear protection, dust mask and
protective clothing including safety gloves.
•
Ensure that the lighting is adequate.
Keep the area free of tripping hazards.
•
•
Do not let anyone under the age of 18 years operate
this saw.
Always stand to one side when operating the saw.
•
•
Never use a cracked or distorted saw blade.
Only use sharp blades.
•
When cutting round wood, use clamps that prevent
the work piece from turning on both sides of the blade.
Never use your hands to remove sawdust, chips or waste
•
close by the blade.
•
Use only blades as recommended.
Rags, cloths, cord and string and the like should never be
•
left around the work area.
•
Avoid cutting nails. Inspect the work piece and remove all
nails and other foreign objects before beginning sawing.
•
Support the work properly.
•
Never reach over the blade to remove waste or off cuts.
Do not attempt to free a jammed blade before first
•
switching off the machine.
•
Do not slow or stop a blade with a piece of wood.
Let the blade come to rest naturally.
5
This