Hifonics Zeus ZXi6406 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Hifonics Zeus ZXi6406. Hifonics Zeus ZXi6406 15 pagina's.

Pagina afdrukken
Hifonics Zeus ZXi6406 Handmatig

ZXi4406 / ZXi6406 4 CHANNEL AMPLIFIER APPLICATIONS

4 CHANNEL FULL RANGE SYSTEM
Here we show how to use the 4 channel amplifiers as straightforward discrete 4
Here we show how to use the 4 channel amplifiers as straightforward discrete 4
channel full range units.
channel full range units.
Interconnect cable checklist:
Interconnect cable checklist:
- Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables.
- Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables.
Switch setting checklist:
Switch setting checklist:
- 1/2CH X-OVER:
- 1/2CH X-OVER: FULL
FULL
- 3/4CH X-OVER: FULL
- 3/4CH X-OVER:
FULL
Crossover frequency control checklist:
Crossover frequency control checklist:
Channels 1/2:
Channels 1/2:
FULL RANGE
STEREO LINE
INPUTS
B OOS T
H FR - 3
M I N
M A X X
2 or 3 CHANNEL FULL RANGE SYSTEM
Here we show how to use the 4 channel amplifiers as full range 2 or 3 channel
Here we show how to use the 4 channel amplifiers as full range 2 or 3 channel
units by taking advantage of the mono bridging capability of all Hifonics
units by taking advantage of the mono bridging capability of all Hifonics
amplifiers.
amplifiers.
The following example shows how to create a 3 channel system by mono
The following example shows how to create a 3 channel system by mono
bridging channel pair 3 / 4. In order to create a 2 channel system, simply follow
bridging channel pair 3 / 4. In order to create a 2 channel system, simply follow
the example to also mono bridge channel pair 1 / 2.
the example to also mono bridge channel pair 1 / 2.
Interconnect cable checklist:
Interconnect cable checklist:
- Connect the inputs of channel pair 1/2 to a suitable stereo source, e.g. a head
- Connect the inputs of channel pair 1/2 to a suitable stereo source, e.g. a head
unit with good quality RCA cables.
unit with good quality RCA cables.
- A MONO signal source is required to bridge channel pair 3/4, such as would be
- A MONO signal source is required to bridge channel pair 3/4, such as would be
available from the mono sub bass output of an active crossover, whether
available from the mono sub bass output of an active crossover, whether
standalone, or built into a head unit or equalizer.
standalone, or built into a head unit or equalizer.
Important:
Important: Do not be tempted to connect the hot, or positive outputs, from any
Do not be tempted to connect the hot, or positive outputs, from any
source together to obtain a mono signal, as this could very well damage the
source together to obtain a mono signal, as this could very well damage the
output stage of that source.
output stage of that source.
- It is necessary to feed the SAME signal to both left and right inputs via a Y-
- It is necessary to feed the SAME signal to both left and right inputs via a Y-
adapter RCA cable.
adapter RCA cable.
- Connect the mono speaker positive terminal to the LEFT +, and its negative
- Connect the mono speaker positive terminal to the LEFT +, and its negative
terminal to RIGHT - as shown.
terminal to RIGHT - as shown.
Switch setting checklist:
Switch setting checklist:
1 STEREO
1 MONO
FULL RANGE
LINE INPUTS
B OOS T
H FR - 3
M I N
M A X X
4
- HI PASS: N/A
- HI PASS: N/A
- LOW PASS: N/A
- LOW PASS: N/A
Channels 3/4:
Channels 3/4:
- HI PASS: N/A
- HI PASS: N/A
- LOW PASS: N/A
- LOW PASS: N/A
Level control checklist:
Level control checklist:
- Refer to the section
- Refer to the section "Setting up systems after installation for best performance"
"Setting up systems after installation for best performance"
Minimum final loudspeaker impedances:
Minimum final loudspeaker impedances:
- 2 ohm per channel.
- 2 ohm per channel.
- 1/2CH X-OVER:
- 1/2CH X-OVER: FULL
FULL
- 3/4CH X-OVER:
- 3/4CH X-OVER: FULL
FULL
Crossover frequency control checklist:
Crossover frequency control checklist:
Channels 1/2:
Channels 1/2:
- HI PASS: N/A
- HI PASS: N/A
- LOW PASS: N/A
- LOW PASS: N/A
Channels 3/4:
Channels 3/4:
- HI PASS: N/A
- HI PASS: N/A
- LOW PASS: N/A
- LOW PASS: N/A
TIP:
TIP: If you are using the mono sub bass output of an active crossover, there is
If you are using the mono sub bass output of an active crossover, there is
nothing wrong with switching in the low pass filter in these amplifiers for a
nothing wrong with switching in the low pass filter in these amplifiers for a
steeper low pass rolloff.
steeper low pass rolloff.
Level control checklist:
Level control checklist:
- Refer to the section "Setting up systems after installation for best performance"
- Refer to the section
"Setting up systems after installation for best performance"
Minimum final loudspeaker impedances:
Minimum final loudspeaker impedances:
- 2 ohm per channel in stereo mode.
- 2 ohm per channel in stereo mode.
- 4 ohm mono bridged.
- 4 ohm mono bridged.
FULL RANGE
SPEAKERS
TO BATTERY +12v
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND
MONO
OR SUB BASS
SPEAKER
STEREO
FULL RANGE
OR HIGHS
SPEAKERS
TO BATTERY +12v
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND