Autonics LE4SA Instructie - Pagina 5

Blader online of download pdf Instructie voor {categorie_naam} Autonics LE4SA. Autonics LE4SA 18 pagina's. Din w48xh48mm digital backlight lcd timer
Ook voor Autonics LE4SA: Handmatig (17 pagina's)

Pagina afdrukken
Autonics LE4SA Instructie
LE4S Series
Function and time setting
Configuration
Reset
Function
setting mode
※ If changing function setting,
operation will stop.
● Reset
Reset using
key in Run mode
● Run mode
The operation status(When power is on for the first time : factory default setting) is displayed.
It could enter into function setting mode, setting value change mode and output contact status mode.
● Function setting mode
If pressing
key over 3 sec. in the Run mode, it will enter into function setting mode and if pressing
in function setting mode, it will return to Run mode.
※ Even if it enter into function setting mode in Run mode, time progressing and output control will continue.
※ If operation settings are changed in function setting mode, all outputs will be off and reset on returning to run mode.
● Output contact status mode(LE4SA only)
Output contact status are displayed while pressing
※ If pressing
key over 3 sec., it will enter into function setting mode.
● Setting time change mode
Press
key to enter into setting time change mode and press
Even if signal is input when changing setting time, time progressing and output control will be continue.
If no key is pressed over 60 sec. in setting time change mode, it will return to Run mode.
※ If no key is pressed over 60 sec. in setting time change mode, it will return to Run mode and previous parameter
value is not stored.
K-24
Power On
key
RUN mode
key
for 3sec.
key
for 3sec.
key in Run mode.
Setting time
key
change mode
key
while pressing
key
Checking out-
put
contact status
※ LE4SA only.
: Enabled mode
key to return to Run mode.
: Disabled mode
key over 3 sec.