Autonics LE4SA Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Autonics LE4SA. Autonics LE4SA 17 pagina's. Din w48xh48mm digital backlight lcd timer
Ook voor Autonics LE4SA: Instructie (18 pagina's)
Pagina afdrukken
Function and Time Setting
Configuration
Reset
Function
setting mode
※ If changing function setting,
operation will stop.
● Reset
Reset using
in Run mode
● Run mode
The operation status (when power is on for the first time: factory default setting) is displayed.
It could enter into function setting mode, setting value change mode and output contact status mode.
● Function setting mode
If pressing
over 3 sec in the Run mode, it will enter into function setting mode and if pressing
setting mode, it will return to Run mode.
※ Even if it enters into function setting mode in Run mode, time progressing and output control will continue.
※ If operation settings are changed in function setting mode, all outputs will be off and reset on returning to run mode.
● Output contact status mode (LE4SA only)
Output contact status are displayed while pressing
※ If pressing
over 3 sec, it will enter into function setting mode.
● Setting time change mode
Press
to enter into setting time change mode and press
Even if signal is input when changing setting time, time progressing and output control will be continue.
If no key is pressed over 60 sec in setting time change mode, it will return to Run mode.
※ If no key is pressed over 60 sec in setting time change mode, it will return to Run mode and previous parameter value is
not stored.
Power On
RUN mode
for 3sec
for 3 sec
in Run mode.
LCD Display Timer
Setting time
change mode
while pressing
Checking
output
contact status
※ LE4SA only.
: Enabled mode
to return to Run mode.
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(J)
Temperature
Controllers
(K)
SSRs
(L)
: Disabled mode
Power
Controllers
(M)
Counters
(N)
Timers
(O)
Digital
Panel Meters
(P)
Indicators
over 3 sec in function
(Q)
Converters
(R)
Digital
Display Units
(S)
Sensor
Controllers
(T)
Switching
Mode Power
Supplies
(U)
Recorders
(V)
HMIs
(W)
Panel PC
(X)
Field Network
Devices
N-27