Autonics LE7M-2 Handmatig - Pagina 12

Blader online of download pdf Handmatig voor {categorie_naam} Autonics LE7M-2. Autonics LE7M-2 13 pagina's. W72xh72mm lcd week/year digital timers
Ook voor Autonics LE7M-2: Handmatig (13 pagina's), Handmatig (13 pagina's), Producthandleiding (5 pagina's)

Pagina afdrukken
Autonics LE7M-2 Handmatig
LE7M-2
⑤ ON time setting(AM, PM)
SUN MON TUE WED THU FRI SAT
⑥ ON time setting(Hour, Minute)
SUN MON TUE WED THU FRI SAT
⑦ Pulse width setting
SUN MON TUE WED THU FRI SAT
⑧ Complete to set
SUN MON TUE WED THU FRI SAT
※It is able to set year of start/end date in yearly program
setting up to 2 years later from the present year.

Program check, modify and delete

Weekly program check, modify and delete
RUN mode
Press
MODE
key
Press
CHECK
for 3sec.
key for 1sec.
Program1 weekly program
record No.1 [ r01 ]
setting check
CHECK
Program1 weekly program
record No.2 [ r02 ]
setting check
CHECK
Program2 weekly program
record No.1 [ r01 ]
setting check
CHECK
key is pressed, move the
select PM by
or
key
when ON time is afternoon.
Press
or
key twice to
set 10 and press
key
SET
after check 00min.
Press
or
key 4 times
to select pulse width as 5s
and press
key.
SET
Press
key to set
SET
additional program.
Press
SET
Program1 weekly program
key for 3sec.
record No.1 [ r01 ] setting
modify and delete
Press
SET
Program1 weekly program
key for 3sec.
record No.2 [ r02 ] setting
modify and delete
Press
SET
Program2 weekly program
key for 3sec.
record No.1 [ r01 ] setting
modify and delete
Authorised All India Distributors:-
Intech Controls,,
S-2, Guiny Industrial Estate, Chennai - 600 032
Ph: +91 44 4353 8888 Mob: Fax: 044 4353 7888
E-mail: [email protected] Website: www.intechcontrols.in
Yearly program check, modify and delete
RUN mode
Press
key
Press
MODE
CHECK
for 3sec.
key for 1sec.
Press
key for 3sec.
Program1 Yearly program
record No.1 [ r01 ]
setting check
CHECK
Press
Program1 Yearly program
key for 3sec.
record No.2 [ r02 ]
setting check
CHECK
Press
Program2 Yearly program
key for 3sec.
record No.1 [ r01 ]
setting check
CHECK
※YEAR turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60sec, it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output
according to program setting and output is OFF in
modify or delete mode.
● When
key is pressed in weekly or yearly
MODE
programrecord modify, delete stand by or delete mode,
current work is cancelled and it is returned to check
mode.
● Weekly or yearly program record modify and delete
(1) Program record modify
① When press
key over 3sec. in program check, EDT
SET
②
as the above procedure.
(2) Program record delete
① When press
key over 3sec. in program check, EDT
SET
CLR
② Press CLR key over 3sec. when
display part, it returns to program check.
SET
Program1 Yearly program
record No.1 [ r01 ] setting
modify and delete
SET
Program1 Yearly program
record No.2 [ r02 ] setting
modify and delete
SET
Program2 Yearly program
record No.1 [ r01 ] setting
modify and delete
key.
SET
or
key until
key.
SET
turns ON in second
SET