Autonics LE7M-2 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Autonics LE7M-2. Autonics LE7M-2 13 pagina's. W72xh72mm lcd week/year digital timers
Ook voor Autonics LE7M-2: Handmatig (13 pagina's), Handmatig (13 pagina's), Producthandleiding (5 pagina's)

Pagina afdrukken

LE7M-2

• Set range for ON/OFF time width

: 1min. to 12 hour 59min.

• One record in 3 steps (ON day/ON time, OFF day/OFF

time, ON time width/OFF time width)

OFF width

ON time

● Weekly pulse mode

Output turns ON at ON time for a specified pulse width.

(Pulse width: 1 to 59sec., 1 to 60min.)

• One record in two steps (ON day/ON time, pulse width)

(1 to 59sec., 1 to 60min.)

● Yearly ON/OFF mode

Output turns ON at ON time on START date and turns OFF

at OFF time on STOP date.

• One record in three steps (START/STOP date, ON/OFF

time)

● Yearly pulse mode

Output turns ON at ON time on START date and turns

OFF at OFF time on STOP time for a specified pulse width

repeatedly. (Pulse width: 1 to 59sec., 1 to 60min.).

• One record in three steps (START/STOP date, ON time,

pulse width)

Program operation

Weekly setting 1 of Program 1

Weekly setting 2 of Program 1

Yearly setting 1 of Program 1

Program 1 mode

● ① to ②: Operated by weekly setting 1 of Program 1.

● ② to ③: Operated by weekly setting 2 of Program 1.

● ④ to ⑤: Operated by weekly setting 1 of Program 1.

● ⑤ to ⑥: Operated by yearly setting 1 of Program 1.

(During weekly program operation at 12:00 AM on

START date, the weekly program operation stops, and it

changes to yearly program operation mode. The yearly

program operation stops at 12:00 AM on the next day of

STOP date.)

K-82

ON width

OFF time

Pulse width

ON Time

①

② ③ ④ ⑤ ⑥

Display and change of next mode

● The day of next mode in Program 1 or Program 2 is

displayed on the day indicator, and the time of next mode

is displayed on the lower row of screen. Press

in RUN mode it is changed from program 1 to

program 2 or from program 2 to program 1.

● In ON/OFF operation mode, set ON time and OFF time

to next mode. In Pulse operation mode, set Pulse ON

time to next mode.

Power restore mode

In setting group 2-Level 2 (Power restore), select auto [ AT ]

or normal [ NOR ] by

● Auto [ AT ] power restore mode

Output (OUT1, OUT2) operates according to program

when power turns on again after power failure.

● Normal [ NOR ] power restore mode

When power turns on again after power failure, output is

kept OFF and RET.IN flashes on the panel. When power

restore input is detected, RET.IN turns off and output

operates according to program.

• Power restore input

Input contact signal in external "Return input terminals (⑨

to ⑩)" by switch or relay, or press

RUN mode.

Please use reliable contacts enough to flow 0.1mA of

current at 5VDC when use switch or relay.

Season switching mode

This feature uses for setting seasonal weekly operation

mode.

To operate this mode, save starting month and date,

ending month and date of each season which displays S1,

S2, S3, S4 then set day and time of each season in weekly

program setting. It is also able to operate only in summer

and winter season. (S1: set summer season, S2: set winter

season, S3/S4: do not set)

At the season switching selection LEVEL 2 status in setting

2 group ( SEN turns ON, OFF flashes), select ON [ ON ] by

pressing

key and press

season switching.

Be sure that if changing season switching from OFF to ON

or, ON to OFF , the weekly program 1 (P1) and the weekly

program 2 (P2) which are set before are deleted.

● ON [ ON ] mode

Weekly program is switched automatically by season

switching.

• Period setting per season

① At the season switching selection LEVEL 2 status in

setting 2 group ( SEN flashes, the set season turns ON,

START and STOP turn ON), press

② Advance to the flashing position of season selection

among S1, S2, S3, S4 by

key.

③ After set START month, date per season and press

key.

④

key is pressed after set STOP month, date per season,

it is advanced to LEVEL1 of period setting per season.

Add or adjust the period setting by

● It is disable to use when it is OFF [ OFF ].

● If season terms are overlapped, these are prioritized in

S4>S3>S2>S1 order.

key, and press

key to set.

key for 3sec. in

key to complete the

key.

key and press

key.