dynarex 10404 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} dynarex 10404. dynarex 10404 16 pagina's. Full electric bed with emergency hand crank

6. After the head and foot end sections of the bed are connected, push the decks into a horizontal

(straight) position while still on their sides.

7. Attach the boards. Raise the headboard and footboard ¼ inch (6 mm). This can be done by

inserting the manual crank into the receptacle on the headboard and footboard and turning the crank

clockwise until the bed end is at the correct height.

8. Attach the headboard by placing the headboard as close to the head deck section of the bed. With

one hand, lift the head deck section so that the rivets on the deck are in line with the corner locks. Tilt

the headboard back slightly to allow the rivets to slide into the corner plates. Once the rivets are

engaged in the corner plates, return the headboard to its full upright position. This will lock the

headboard in place.

BED ASSEMBLY