iHealth BP5 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} iHealth BP5. iHealth BP5 17 pagina's. Wireless blood pressure monitor
Ook voor iHealth BP5: Snelstarthandleiding (4 pagina's), Gebruikershandleiding (13 pagina's), Snelstarthandleiding (5 pagina's)

iHealth BP5 Gebruikershandleiding

BATTERY HANDLING AND USAGE

When the monitor is connected to the iOS device, the battery volume
will be displayed on the iOS device. If the power is less than 25%,
please charge the battery. The monitor will not work until the battery
has enough power.
When you charge the monitor, the LED will display with different
colors indicating the charging status. See the table below for
details.
When charging is needed, please connect the monitor to a power source.
The monitor can work normally while charging.
It is suggested that you charge the battery when the battery is less
than 25%.
Monitor Status
Charging
Fully charged
Low battery
Abnormal state
Do not change the battery. If the battery can no longer be charged,
please contact Customer Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could
result in a hazard such as a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according
to local regulations at the end of their usage.
Note
Battery life and charge cycles vary by use and settings.

TROUBLESHOOTING

PROBLEM
Low Battery
Display reads
"ERROR"
Status Indicator
Flashing green light
Steady green light
Flashing red light (for a few
seconds)
Steady red light
POSSIBLE CAUSE
Battery is less than
25%
Blood pressure is
outside of
measurement range
Arm or monitor was
moved during test
SOLUTION
Charge the battery
Retest, make sure your blood
pressure is within
measurement range
Retest, make sure not to move
your arm or the monitor
9