Autonomous SmartDesk Core Duo Montage-instructies

Blader online of download pdf Montage-instructies voor {categorie_naam} Autonomous SmartDesk Core Duo. Autonomous SmartDesk Core Duo 3 pagina's.

SmartDesk Core Duo

1a. Loosen 4 x (M) Screws of Support Beam (I) using 4mm Allen Wrench, then fully extended the

beam.

Heads up

The 4(M) are

already

attached into

the beam

1b. Place Support Beam (I) over Legs (A1 + A2). Attach with 8 x (W) Screws. Repeat this step with

the other support beam.

Make sure

connectors

are facing the

same side.

2. Attach 2 x Connection Beams (B) to the legs as shown. Place 8 x (Z1) Gaskets on 8 x (V)

Screws, then use them to secure the 2 x Connection Beams (B) in place with the 5mm Allen

Wrench.

Assemble other

Support Beam

following the

same steps.