9dot SPMS SPP Handmatig - Pagina 11

Blader online of download pdf Handmatig voor {categorie_naam} 9dot SPMS SPP. 9dot SPMS SPP 15 pagina's.

Installation

With the rack bracket it is possible to install up to 12 modules in an organized manner on a 2U rack.

Quick installation procedure below:

•

(For SPI only) Configure the polarity and mode with the switches.

•

(Optional) Insert the modules on the rack bracket or on the din bar.

•

Wire the power supply (Optional standalone ACDC-48 or ACDC-24 power supplies provided separately by 9dot).

•

Connect the power supply pins of the power supply to each module.

•

(Optional) Insert the rack bracket in the structure used to house the devices.

•

Connect the power supply to the electricity.

In addition, both SPIs and SPPs can be installed using the Din rail mounting clip.

SPI & SPP MANUAL

Figure 5 - din bar Clip

VER. 2 REV. 0