Autopage KE-120 Bedieningshandleiding - Pagina 2

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Autopage KE-120. Autopage KE-120 2 pagina's. Professional keyless entry system

Pagina afdrukken

PARKING LIGHT INDICATORS

PARKING LIGHTS

Operation

1 Flash + 10 sec on

Locked/ The parking lights will remain "on" for 10 sec.

2 Flashes + 30 sec on Unlocked / The parking lights will remain "on" for 30 seconds

Continuous Flash

Panic Mode Engaged (30 Sec.)

10)

STARTER INTERRUPT CIRCUIT (OPTIONAL)

The vehicles starter circuit may be interrupted for additional protection when the System is

locked. Use of the RK-1 Starter Interrupt Relay kit is recommended.

11)

TRANSMITTER PROGRAMMING

In the event, you should need to add or replace a Remote Control Transmitter, it is

important that you follow the instructions below.

Note:

Each step must be performed within 10 seconds of the previous step otherwise the System

will exit the programming mode.

PROGRAMMING THE REMOTE TRANSMITTER

Enter:

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON

position. Within 15 seconds.

2. Push the Valet switch 2 times. (Holding in on the 2nd push) until you hear a long chirp. The

transmitter is ready to program.

Program:

1. Press any button on the transmitter until the horn responds with a confirming chirp and parking

light flash once the first transmitter is now programmed.

2. Press button on the second transmitter until the horn responds with a confirming chirp, the

second transmitter is now programmed.

3. Apply the same procedure to program 3rd and 4th .

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.

You must register your product online at

receive any warranty service.

Please go to the customer service tab and select product registration.

Warning: Some batteries may contain Perchlorate

For Warranty Information, Please visit

Function

http://www.autopageusa.com

www.autopageusa.com

PROFESSIONAL KEYLESS ENTRY SYSTEM

THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY

KE-120

OPERATIONS MANUAL

Please register your product at