Autopage RS-777 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Autopage RS-777. Autopage RS-777 14 pagina's. Remote engine starter with alarm system

Pagina afdrukken
Autopage RS-777 Gebruikershandleiding
F
Press and hold the
Button until 2 beeps
sounded
F
nd
Press
Button 2
time (HHU 1 beep)
within 5 seconds
F
Press
Button 3rd
times (HHU 1 beep)
within 5 seconds
F
Press
Button 4th
times (HHU 1 beep)
within 5 seconds
F
Press
Button 5th
time (HHU 1 beep)
within 5 seconds
Table 4 : Return 2-way HHU to default setting
Enter : Press & hold " F " button until 4 beeps heard, release F-button.
EXIT: Press & release " F " button or do nothing wait for 5 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
F
Button
F
Press and hold the
Button until 4 beeps
sounded
D. PROGRAMMING 2-way LCD HHU (
Enter:
F
1.
Press and hold
2.
The Matrix show MENU flash, press
(LCD display show Hours of current time set up, set up hour(s) first.)
3.
Press
button to increase value, or Enable the selected feature.
4.
Press
button to decrease value, or Disable the selected feature .
5.
Press
button to confirm its selection, move to the next option.
EXIT: Press & hold " F " button or do nothing wait for 15 sec. automatic exit
2-way LCD (1 beep) => Confirm Exit.
Order
Menu Option
Current time set
1
up
Adjust clock hours
from 0 to 12
Adjust clock
minutes from 0 to
59
2
Alarm Clock set
up
RS-777 OP REV 1D
MENU
flashing
STATUS CHECK
ALARM CHECK
VOLTS CHECK
TEMP
CHECK
LCD display
RESET
flashing
button until 2 beeps heard then release the
button to enter HHU menu mode.
LCD display
12
: 00
12 is flashing
00
12:
00 is flashing
Press
HHU menu mode
Press
the vehicle's status.
Press
vehicle's trigger status.
Press
vehicle's Voltage.
Press
temp. status
Button
Press & hold
seconds to back to default setting
and 1 chip for confirm
Select and Adjusting Table-2-Menu options):
F
button.
Functions
Default is 12:00
Press
button = (+) or
Press
button = (-)
Press
button confirm its selection, move to next
option.
Press
button = (+) or
Press
button = (-)
Press
button confirm its selection, move to next
option.
Default is OFF
4
2013/05/29
button to enter 2-way
button Enable to check
button Enable to check
button Enable to check
button Enable to check
button for 2