Autopage C3 Installatiehandleiding - Pagina 6
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Autopage C3. Autopage C3 8 pagina's. Telematics and tracking module
Ook voor Autopage C3: Bedieningshandleiding (16 pagina's)
Pagina afdrukkenThe combination antenna has two sets of coaxial cable coming
from it. These are both marked with a tag that will identify the
function of that wire. These cables cannot be interchanged and
need to be attached correctly for operation.
NEVER CUT or extend the antenna cables for any reason.
GSM: The antenna lead labeled GSM is for the reception and
transmission of cellular signals. This should be connected to the
antenna terminal marked with GSM on the back side of the C|3
unit. Please insure that this connection is tight and will not vibrate
loose.
GPS: The antenna lead labeled GPS is for the tracking portion of
the C|3 unit. It relies on Global Positioning Satellites to determine
the location of the vehicle and is accurate to within a few feet.
The cable Labeled GPS should be connected to the antenna
terminal marked GPS on the back side of the C|3 unit. Please
insure that this connection is tight and secure.
A high power covert mounted antenna can be purchased from
Auto Page. This can be used if the user would like to mount the
antenna in a non conventional place or if the device is used where
cellular or GPS signals are very weak. Please call your local
Authorized Auto Page dealer for details. Part #: C|3 Covert Ant
Kit.
The Global Positioning System (GPS) is the only fully functional Global
Navigation Satellite System (GNSS) utilizing a constellation of at least 24
medium Earth orbit satellites that transmit precise microwave signals, the system
enables a GPS receiver to determine its location, speed, direction, and time.