Autopage RF-700 Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Autopage RF-700. Autopage RF-700 20 pagina's. Vehicle security system
Pagina afdrukken
RF-700 OPERATION INSTRUCTIONS
A. REMOTE CONTROL TRANSMITTER OPERATION
The remote control transmitters (XT-64) included with the RF-700 offer the code rolling feature which
will prevent illegal use of a code-grabber with an attempt to record the code of your transmitter. In
addition, these unique transmitters feature LCD (Liquid Crystal Display) readouts, and various function
icons to allow custom setting of your RF-700 alarm system. The following icons will appear in the top
half of the transmitter window.
SENSOR, BYPASS, TEMP = TEMPORARY, PASSIVE, PREWARN, ALARM, and VALET.
The following icons appear in the right corner of the bottom half of the transmitter window.
ON and OFF
The following LCD (Liquid Crystal Display) readouts will appear in the bottom half of the transmitter
window when a particular command or function is selected.
LCD Readout
ARM
DSARM
TRUNK
PANIC
PRGRM
REARM
3RDCH
CHIRP
CAR 1
CAR 2
CAR 3
Lock
LOCK
IGNLK
Unlock
UNLK
LIGHT
RESET
TEST
EXIT
SYSTEM BY UNLICENSED PERSONNEL.
Meaning
Arm
Disarm
Trunk
Panic
Program
Rearm
Third Channel
Chirp
Car #1
Car #2
Car #3
Enable or disable passive door locking
Ignition door lock
Priority door unlock
Light
Reset
Test
Exit
Function
Arm the RF-700
Disarm the RF-700
Remote trunk release
Activate the panic feature
Enter the RF-700 program mode
Enable or disable automatic rearm feature
Third channel has been selected
Enable or disable arm/disarm chirp
(Above also used for temporary chirp delete)
Transmitter set for car #1
Transmitter set for car #2 (*)
Transmitter set for car #3 (*)
Enable or disable ignition door locking
Enable or disable transmitter backlight
Return RF-700 to factory default settings
Tests door, trunk, and shock sensor
connections
Exit program commands
2