Autopage MA-200 Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Autopage MA-200. Autopage MA-200 13 pagina's. 2-way remote control motorcycle alarm
Ook voor Autopage MA-200: Handleiding voor installatie-instructies (8 pagina's)

Pagina afdrukken

2-WAY LCD REMOTE TRANSCEIVER

Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power

or such Obstacles like tall buildings and so on, the transmission range may get shorter as the system

uses low out put powered frequency.

A. BATTERY REPLACEMENT:

A 1.5V type AAA Alkaline battery powers the Remote Transceiver. When the power of the battery weakens

icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will

be beep sounds indicate the power is up and the clock on the LCD screen returns to AM12:00 after

displaying all the icons. Correct the time by pressing

Note: Press the

button two times when the battery compartment is empty, then insert the new battery.

B. THE REMORE LCD ICONS WITH FUNCTION:

Armed Mode

Your motorcycle is in the armed

mode

Remote Transmission

You are transmitting the signal to

control unit

Trigger on the Tilt Switch

(Zone 2) optional

Trigger on the Shock Sensor

(Zone 4)

Trigger on the Ignition Switch

(Zone 5).

Time Monitor

Count Down Timer

Reminder when time is up for

parking

Vibration Mode

Remote Control vibrates when the

system is triggered

Driver paging / Lost and Found

Someone is paging you in front of

your motorcycle

C. PROGRAMMING OF THE LCD REMOTE TRANSCEIVER:

Transceiver Button

Description

(1 second)

LCD screen lamp turns on for

5 seconds.

(3 seconds)

Timer Programming Mode.

MA-200 OP REV.A

for 3 seconds before using (See Timer Setting).

Disarm

The system is Disarmed.

In – Range Indicator

Your are within the remote controls

range.

Trigger on the Close Loop

(Zone 3).

Activate on the Warn away Trigger

Alert Alarm

You have set morning call alarm

Power Save Mode

Save the battery power

Button Lock

Disable the transmission function

temporarily

Low Battery

You have to replace the battery of

remote control.

Operation

Press and hold the

1 second, 1 melody sound will

confirm entry.

Press and hold the

3 seconds, 2-melody sounds will

confirm entry.

Oct/23/2006

button for