Emerson 7829FEANAHRABA Productgegevensblad - Pagina 10

Blader online of download pdf Productgegevensblad voor {categorie_naam} Emerson 7829FEANAHRABA. Emerson 7829FEANAHRABA 12 pagina's. Viscosity meter

Installation

A variety of installation accessories are available for both inline and slipstream/bypass installations.

Additionally, retrofit adapter kits are available for easy replacement of other viscosity measurement

technologies. For more information on these installation accessories, see the Micro Motion

Viscomaster

Series Accessories product data sheet available at www.micromotion.com.

Fuel heater control example

Most marine and land-based engine/burner applications use a fuel booster module to precondition the

heavy fuel oil (HFO) prior to injection. These modules usually consist of a number of supply pumps fed by

either HFO or MDO, a flow meter, in-line filters to remove the impurities, and a holding/mixing tank.

Following the supply section, the fuel is usually sent to booster pumps that increase the flow rate up to a

maximum of 20 m

/hr and then through a series of heat exchangers (liquid or electric) to change the product

viscosity for efficient combustion.

Following is a graphic that shows the different installation options for the 7829 Viscomaster Dynamic in a fuel

booster module.

To engine

Inline viscosity meter replacement

(VAF Viscosense retrofit)

Viscosity output

Micro Motion 7829 Viscomaster Dynamic Viscosity Meter

Fuel oil heat exchanger

Fuel oil

Micro Motion flow-through-chamber

installation

Viscosity output

Viscosity input

7829

Alarms

Relays

Control valve

Heating fluid

Capillary viscosity meter

replacement (VAF Viscotherm or

Nakakita retrofit)

Viscosity

output