Dynasplint Type II Montagehandleiding - Pagina 6

Blader online of download pdf Montagehandleiding voor {categorie_naam} Dynasplint Type II. Dynasplint Type II 8 pagina's. Wrist extension system

TROUBLESHOOTING

Instruct patient to remove the Dynasplint® System immediately if pain or numbness occurs.

A hand pan can be substituted for the palmar bar and is available through the

Dynasplint® Systems representative. See options in Figure 2.

PrOBlEM:

SOluTIOn: Open or lengthen horizontal bar.

PrOBlEM:

SOluTIOn: Use stockinette between arm and splint.

PrOBlEM:

SOluTIOn: Decrease the tension by increments of 0.5 until the unit is

PrOBlEM:

SOluTIOn: Check cuff and straps for over-tightness. Decrease wearing

cOnTrAInDIcATIOnS: Although Dynasplint® Systems can provide unusually con-

servative stretching force, these devices are contraindicated where range of motion

therapy is inappropriate.

PrEcAuTIOnS: Carpal tunnel syndrome, osteoporosis, thrombophlebitis, spasticity,

edema, gross ligament instability, and circulatory impairment.

nOTE: This device is restricted to use on the order of a licensed health care practitioner.

Metal joints are pressing into the wrist.

Comfort pads or Velcro® irritating the skin.

Pain.

tolerated. Unless absolutely necessary, do not decrease

wearing time. Some patients may have to resort to day

time/evening use and/or multiple sessions, i.e., two, four-

hour daytime/evening sessions.

Numbness.

tension by increments of 0.5. Repeat adaptation wearing

schedule.