Emerson E2 Snelstarthandleiding - Pagina 6

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Emerson E2. Emerson E2 14 pagina's. Clarification of the operation of alarm annunciators
Ook voor Emerson E2: Gebruikershandleiding (17 pagina's), Snelle referentiehandleiding (2 pagina's), Handleiding voor snelle installatie (2 pagina's), Snelstarthandleiding (8 pagina's), Gebruiksaanwijzing (12 pagina's), Snelstarthandleiding (14 pagina's), Snelstarthandleiding (9 pagina's), Snelstarthandleiding (9 pagina's), Installatie- en bedieningshandleiding (20 pagina's), Technisch bulletin (8 pagina's)

quick start guide

E2 Setup with Carrier Corporations RTU Open Controller for 527-0359

STEP 4: Commission the Echelon device.



9. Press

10. Use the UP and DOWN arrow keys to highlight the device name and then press

(Commission).

11. Select the method to use for identifying the device. Select from the list:

1 = Service Pin --> The physical button on the controller must be pressed. This is the

preferred method for device accuracy.

2 = Entering Neuron ID(s) directly --> Echelon device address should consist of 12

characters. The device is identified via remote communication using the Neuron ID.

Use this selection if the Neuron ID of the device is available.

3 = Specifying a range of nodes --> The network is scanned for neuron addresses.

Document Part # 026-4921 Rev 0 03-MAY-2012

Visit our website at http://www.emersonclimate.com/ for the latest technical documentation and updates.

, 7 (System Configuration), 7 (Network Setup), 1 (Network Summary).

Figure 7 - Commission the Device



Page 6 of 14