Dynastream Innovations AMP 331 Instructies voor gebruikers - Pagina 8

Blader online of download pdf Instructies voor gebruikers voor {categorie_naam} Dynastream Innovations AMP 331. Dynastream Innovations AMP 331 15 pagina's.

Pagina afdrukken

AMP ANKLE SLEEVE

The AMP Ankle Sleeve is used to hold the pod in the correct position on the test subject's leg. It is essential

that the pod be properly oriented and positioned on the leg to ensure accurate monitoring of activity.

4.1

Starting data collection

At the start of data collection, follow these steps.

1. Turn the pod on and start the data collection before inserting the pod into the ankle sleeve.

2. Insert the pod into the ankle sleeve with the nose first, such that the LCD is visible in the circular

window. Close the triangular flap to keep the pod in.

3. Use the Velcro strap to attach the pod on the back of the leg just above the ankle. It is best to tighten the

strap around the narrowest part of the leg so that it is unlikely to slide down. The ankle sleeve can go

directly over the skin or over a sock or stocking. Check that:

a. The ankle sleeve is correctly oriented. The Dynastream logo on the strap should be right side

up and the triangular flap that holds the pod in the pocket should be on top.

b. The pod is squarely on the back of the leg. The pod should be over the Achilles tendon.

c. That the strap is tight enough to ensure that the pod does not flap or rotate around the leg as the

test subject walks, however loose enough to be comfortable.

Dynastream Innovations Inc.

AMP 331 Instructions for Users

DOCUMENT NO: D00000381 Rev. 0.E

SHEET: 8 of 8