DCI Edge SERIES 4 Handleiding voor installatie-instructies - Pagina 7
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} DCI Edge SERIES 4. DCI Edge SERIES 4 14 pagina's. Dental chair
Ook voor DCI Edge SERIES 4: Handleiding voor installatie-instructies (12 pagina's), Handleiding voor installatie-instructies (11 pagina's), Gebruiksaanwijzing (8 pagina's)
Pagina afdrukken
UPHOLSTERY INSTALLATION
SEAT UPHOLSTERY
Center and place the seat upholstery on the seat
1
plate so that the clips on the bottom of the seat
upholstery drop into the slots of the Seat Plate.
Engage the clips by pushing the seat upholstery
2
toward the backrest.
Once the clips are engaged, turn the two rotating
3
catches 90 degrees to lock the seat in position.
WARNING: Failure to properly assemble
the seat upholstery to the chair could result
in injury or damage to the equipment.
BACKREST UPHOLSTERY
Attach the backrest upholstery by aligning the
1
lower keyhole features in the plastic substrate to
the flat head elevator bolts on the metal back.
Push down and slide the backest upholstery
2
toward the seat until the upper keyhole features
catch on the upper elevator bolts.
Ensure that the upper elevator bolts engage in
3
the upper keyhole slots of the backrest uphol-
stery substrate and continue to push the backrest
toward the seat until it is fully engaged on the metal
back.
HEADREST UPHOLSTERY
Remove the 6-32 screw from the back of the headrest upholstery
1
and set aside.
Align the keyholes of the headrest upholstery to the flat head bolts
2
on the headrest assembly.
Push down and slide the headrest upholstery toward the bottom
3
tip of the casting to engage the bolts in the keyhole slots.
Complete the assembly by adding the 6-32 screw to the back of
4
the headrest as shown (right).
2
1
SERIES 4 DENTAL CHAIR
Installation Instructions
7