Dynasty DSCT -36-6 Handleiding voor installatie-instructies - Pagina 10

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dynasty DSCT -36-6. Dynasty DSCT -36-6 12 pagina's. Dynasty gas cooktop

Pagina afdrukken

PLEASE REMEMBER: These burners produce a lot

of heat at HI setting. DO NOT OPERATE THE

BURNERS WITHOUT COOKWARE ON THE

GRATES. THE PORCELAIN ON THE GRATES

MAY CHIP IF BURNERS OPERATE FOR AN

EXTENDED PERIOD OF TIME WITHOUT

COOKWARE ON GRATES..

The air for combustion and ventilation is supplied

through the front of the cooktop. The air is exhausted

upward. Do not obstruct the flow of combustion and

ventilation air.

Before startup, make sure that the cooktop has been

carefully checked for gas leaks and that it has been

properly connected to electric power.

The burners are tested and adjusted at the factory

prior to shipping cooktop. Adjustment is not required

on burners.

Opelrl Top Burners

The open top burners are in sets of two. The right

burner knob controls the front burner and the left knob

controls the rear. To ignite the gas at the burner, push

knob in and turn knob to LITE-SIM. You will hear a

clicking sound indicating the proper operation of the

spark igniter. After the air in the supply line has been

purged, the gas should ignite at the burner. After

ignition, turn knob to desired setting. The clicking

sound should stop.