Dynasty Fireplaces Cascade DY-BTX52 Installatie-instructies en bedieningshandleiding - Pagina 7
Blader online of download pdf Installatie-instructies en bedieningshandleiding voor {categorie_naam} Dynasty Fireplaces Cascade DY-BTX52. Dynasty Fireplaces Cascade DY-BTX52 16 pagina's. Linear smart electric fireplace
Ook voor Dynasty Fireplaces Cascade DY-BTX52: Installatiehandleiding (9 pagina's)
Pagina afdrukken
Framing Procedure
1. Build frame according to framing dimensions on previous page and ensure power
source is available
2. Remove front glass and trim piece, and set aside (refer to page 8 for instructions)
3. It is recommended to install the fireplace after finishing the wall to ensure the side
brackets sits flush with the wall finishing
4. After wall has been finished, place fireplace into wall framing and use framing screws to
secure the side brackets to wall. Then install front glass and trim piece.
NOTE: There are four rubber feet on the bottom of the fireplace that can be
removed before installation
Top View
- 7 -