High-Desert 18200 Installatie-instructies

Blader online of download pdf Installatie-instructies voor {categorie_naam} High-Desert 18200. High-Desert 18200 2 pagina's. Multi-use outdoor table

Step 1: Station Setup

1) Remove station from the box and position it sink-side down on the ground so that the support

legs are accessible.

2) Find the outermost leg assembly, and pull outward from the rubber foot end. The leg assembly

will unfold until it is at a right angle to the station.

3) You will find two support struts where the leg assembly meets the table. Make sure that both

are locked completely straight to ensure the stability of the station.

4) Repeat this same process with the innermost leg assembly.

5) Once complete, flip the entire station upside down so that both sets of feet are resting on the

ground and the sink side is now facing upward.

Step 2: Faucet Assembly

1) Take out the whole faucet and count all components.

2) Put the faucet

thread through the steel cover

hole

in the table .

3) Attach the rubber washer

4) Screw the pipe connection

5) Connect the water hose to the pipe connection .

MULTI-USE OUTDOOR TABLE

SETUP INSTRUCTIONS

to the faucet

thread, then screw the plastic thread joints

with the two black washers (

and rubber washer , then insert into the

and

) to the faucet

18200

tightly.