Dynatech TD10000Q Gebruiksaanwijzing - Pagina 2
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dynatech TD10000Q. Dynatech TD10000Q 19 pagina's.
Pagina afdrukken
AMPLIFIER
Precautions Introduction
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electrical
shock, do not remove the cover
(or back). No user serviceable
parts inside; refer servicing to
qualified personnel.
WARNING: To reduce the risk of fire or
electrical shock, do not expose
this appliance to rain or
moisture.
Important Precautions
To reduce the risk of electrical shock or fire, do not expose this unit in rain or
moisture.
Make sure that the AC Mains voltage is correct and matches the voltage printed on
the rear panel of the amplifier (110 V or 220V)
Do not spill water or other liquids into or on to your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken.
Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and fire in case of an
internal short.
Disconnect mains power before making any type of connection.
Do not remove the cover under any conditions. There are no user serviceable
parts inside.
Never plug this unit in to a dimmer pack.
Always be sure to mount this unit in an area that will allow proper ventilation. Allow
about 6" (15cm) between this device and wall.
Do not attempt to operate this unit if it becomes damaged.
This unit is intended for indoor use only, use of this product outdoors voids all
warranties.
During long periods of non-use, disconnect the unit's mains power.
1
TD10000Q
CAUTION
DO NOT OPEN
Front Panel
Rear Panel
!
!
Operation and Performance
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside the enclosure - voltage that
may be sufficient to constitute a
risk of shock.
This symbol, wherever it appears,
alerts you to important operating
and maintenance instructions in
the accompanying literature. Read
the manual.