2HEAT RF-OPTIMA Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} 2HEAT RF-OPTIMA. 2HEAT RF-OPTIMA 4 pagina's. Surface-mounted radio thermostat
Programming:
The RF-OPTIMA provides the option to program 10 time and temperature settings, irrespective of the day, i.e. a total of 70 switching
programmes per week.
These are shown in the top (day), centre (time and temperature) and the bottom (event) of the display.
Carry out the following steps to select the program you want:
-
Press and hold the PRG button (D) for around 3 seconds to enter the Programming settings, the series of figures at the top
and bottom of the display flashes; the day is shown in the top left (starting with 1 as Monday), startup time and temperature
in the centre (A and B) and program event in the right bottom corner.
-
Change these values using the
desired values.
-
When entered the program setting (see above) the time (A) flashes, change the value with the
Each step is 15minutes.
-
Press the PRG (D) button, the temperature flashes (B), change the value with the
can be set with steps of 0,5'C.
-
Press the PRG (D) button, the PRG (program / event) flashes (C). You be able to setup the next event.
The thermostat uses the setting from event PRG 0 till PRG 1. The setting from PRG 1 goes till event PRG 2, from PRG 2 till PRG 3, from PRG 3 till
PRG 4, from PRG 4 till PRG 5, from PRG 5 till PRG 6, from PRG 6 till PRG 7, from PRG 7 till PRG 8 and from PRG 8 till PRG 9. These are the 10
events per day.
Manuel / Program function:
tion:
The desired program function for the RF-OPTIMA is easy to set.
Press the PRG (D) button to set the desired function (program: PRG or manual: MAN)
-
When the thermostat has the function PRG (Program) the thermostat act like the pre installed programs (see programming).
-
When the thermostat has the manual function (MAN), the thermostat act by the desired temperature used by the + and –
buttons. The thermostat doesn't goes automatically to the program function!
Inserting/replacing the thermostat batteries:
RF-OPTIMA THERMOSTAT
+
–
(F) and
(G) buttons. Use the PRG (D) button and the
3
+
–
(F) and
(G) buttons to set the
+
–
(F) and
(G) buttons.
+
–
(F) and
(G) buttons. The temperature