Autoquip III Series Handleiding voor installatie en gebruik - Pagina 9
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Autoquip III Series. Autoquip III Series 12 pagina's. Piston air engine
Pagina afdrukken
5. Apply a small amount of grease to the crank bearing. Piston kits are
supplied greased. Do not fill the crankcase with grease, as this impairs
operation. New engines are supplied greased with approximately 16
grams (0.5 oz.)
6. Re-connect the air supply, making sure the pressure is at zero.
7. Slowly increase the air pressure to approx 1 – 1.25 bar (15-20 psi) the
engine should start to rotate slowly.
8. Disconnect air supply and replace rear cover.
www.aqautomation.com