HighGear AltiTech 2 Gebruikershandleiding - Pagina 17
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HighGear AltiTech 2. HighGear AltiTech 2 20 pagina's. Time, compass, barometer, altimeter, chronograph, and alarm
Ook voor HighGear AltiTech 2: Snelle referentiehandleiding (2 pagina's)
Pagina afdrukken
TABLE OF CONTENTS
CHRONOGRAPH DATA LOG MEMORY
CLEARING LAPS AND RUNS
To CLEAR an individual RUN/WORKOUT, advance to the desired
Run/Workout using the
S2
key.
PRESS & HOLD
will show the RUN number in the top line of the display, HOLD flashing
in the center line and CLEAR in the lower line. Continue holding the
key until the message in the lower line changes ALL.
key before the ALL indication stops flashing, or you will clear ALL the
runs in memory.
To delete ALL RUN/WORKOUT files, continue to
key while the ALL message is displayed in the lower line. When files
are cleared, 4 DASHES will be displayed in the center line.
31
ALTIWARE SERIES
the
S4
key. The display
S4
RELEASE
the
S4
PRESS & HOLD S4
TABLE OF CONTENTS
DAILY ALARM
The Summit/Altitech 2 is equipped with two individual daily alarms which can be set to the hour and
minute for either Time Zone 1 or Time Zone 2.
TURNING AN ALARM ON/OFF
1. Starting in ALARM mode.
2. The top line of the display will show either AL1 or AL2, the
center line will show the CURRENT ALARM SETTING and
the lower line will indicate if the alarm is ON or OFF.
3.
TOGGLE
between ON and OFF using
QUICK PRESSES
the
S1
key.
SELECTING ALARM 1 OR 2
TOGGLE
between ALARM 1 and ALARM 2 shown in the top line
of the display using the
S2
key.
of
summit/altitech 2
32