HighGear Loft Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HighGear Loft. HighGear Loft 19 pagina's. Altiware series

Pagina afdrukken

ALARM FUNCTIONS

SET DAILY ALARM

The Loft unit is equipped with two individual daily alarms. Each alarm can be set to sound at a given hour and minute.

Once either alarm is programmed it is automatically set to ON. Active alarms will sound at the programmed time in both

Time zone 1 and Time zone 2.

SELECT ALARM 1 AND 2

1. Advance to the Alarm (ALRM) screen using QUICK PRESSES of the S4 key

The top line will show AL-1 or AL-2. Change between Alarms using QUICK

PRESSES of the S2 key

The middle line will show the time for which the alarm is set.

The bottom line will show ON or OFF indicating the status of the alarm.

2. Turn the alarm on or off using a QUICK PRESS of the S1 key

SETTING THE ALARM

1. Advance to the Alarm (ALRM) screen using QUICK PRESSES of the S4 key

2. Select which alarm you wish to program using QUICK PRESSES of the S2 key

3. PRESS & HOLD the S5 key to enter the setting sequence

4. Adjust the Hours using QUICK PRESSES of the S1 and S2 key

5. QUICK PRESS the S4 key to set hours and advance to setting minutes

6. Adjust the Minutes using QUICK PRESSES of the S1 and S2 key

7. QUICK PRESS the S4 key to set minutes and advance to set Chime

8. Select Chime ON or OFF using quick presses of the S1 and S2 keys

9. QUICK PRESS the S5 key to set the Chime and exit the Alarm Setting sequence.

The Chime is a single beep each time a key is pressed and a double beep at the

start of each hour. The Key Press Chime is useful if you are trying to operate the

watch under circumstances where it is difficult to look at the watch to confirm that

an action has taken place when a key is pressed.

RESETTING THE WATCH

To RESET THE WATCH back to its default values press the S1, S2, S4 and S5 keys down at the same time. The display

will light up showing all segments followed by a sequence of screens showing various numbers. The watch will then

automatically change to the time of day screen at 12 o'clock on the first of January.

ALTIWARE SERIES

FUNCTIONAL SPECIFICATIONS AND RANGES

GENERAL

Operational Temperature -10C to +50C/ 14F to 122F

Water Resistance 3ATM

Watch Battery CR 2032 3v Lithium

Heart Rate Transmitter Battery CR 2032 3v Lithium

Auto Calendar 2000-2049

ALTIMETER

Range -702 to +9158m / -2306 to +30,045ft

Resolution 1m / 1ft

20 Memories with Date, Time and Altitude

THERMOMETER

Range -10 to +50C / +14 to +122F

Resolution 0.1C/0.1F

BAROMETER

Range 300 to 1100mbar/hPa or 8.86 to 32.48 inHg

Resolution 1mbar/hPa or 0.01inHg

HEART RATE MONITOR

Range 30-240 Beats per Minute

Resolution 1 Best per Minute

% of Maximum Heart Rate 1-100%

CHRONOGRAPH

Range 24 hours

Resolution 0.01 second for first hour; 1.0 second for hours 2-23

LOFT