Gallagher TWR-5 Snelstarthandleiding - Pagina 6
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Gallagher TWR-5. Gallagher TWR-5 16 pagina's. Weigh scale unit
Ook voor Gallagher TWR-5: Snelstarthandleiding (16 pagina's)
Pagina afdrukken
Installing the Antenna Panel
The TWR-1 has an internal reader, that when connected to a Gallagher Antenna
panel will capture the Electronic ID tag data.
To weigh animals in a crush, you will need:
•
Gallagher Antenna Panel kit
•
4m Antenna Extension Cable G05600 or
6m Antenna Extension Cable G05602
Note: A short adapter cable G05601 may be required on early versions of the
Sheep Auto Drafter made prior to 2018.
To mount your Antenna panel, refer to the instructions included with the panel.
Important: Use the defined mounting holes, because drilling through the
Antenna Panel will damage the antenna.
Attaching the TWR-1 to the Antenna Panel
1.
Ensure the TWR-1 is turned OFF.
2.
On the Antenna Panel, unscrew the Amphenol connector locking nut from the
Amphenol socket and pull it down to unplug from the Antenna Panel.
Mounting bracket
Mounting holes
Antenna Cable
Mounting holes
3.
Connect the extension cable to the Amphenol connector and tighten, then
connect the other end of the extension cable to the Antenna connector on
the base of the TWR-1.
4.
Tighten the locking nut.
5.
Refer to Connecting Equipment to the TWR-1 (p. 8) to complete the EID
Reader connection on the TWR-1.
6
Gallagher TWR-1 Weigh Scale Quick Start Guide
Amphenol connector
Amphenol connector (2.)
Mounting holes
2.
Mounting holes