Galleon SignalClocks Installatie- en gebruikershandleiding - Pagina 6

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Galleon SignalClocks. Galleon SignalClocks 13 pagina's. Poe digital clock

Pagina afdrukken

CONFIGURATION

TELNET CONFIGURATION

The clocks can be configured individually using a telnet session. This will need to be done on every

clock in turn.

Using Telnet, you can configure all of the clocks settings including:



IP Address;



NTP Server;



Time-Zone Settings;



DST Settings;



DHCP Settings;



And more.

ESTABLISHING A CONNCTION TO THE CLOCK

Connect the clock to a PoE enabled network and watch the digital display for the DHCP Server IP

Address. DHCP is set as 'On' by default.

If you do not have a PoE enabled network, then you can use a Power Injector (sold separately) to

provide power to the clock.

Once you have the IP Address for the clock, you can establish a connection via Telnet:



In the Start Menu, type cmd and press Enter.



When the command line window appears, type the telnet command 'telnet

xxx.xxx.xxx.xxx 3001', where xxx.xxx.xxx.xxx is the known IP Address of the clock and 3001

is the port number.

N.B. Include spaces between telnet, the IP Address and the Port number.



The clock's Login Prompt should appear

o Login: USER

o Password: USER



You are now ready to configure the clock, using telnet.

www.galsys.co.uk

galleonsupport.com

PoE Digital Clock

Page6

TEL:

+44 (0) 121 608 4433

FAX:

+44 (0) 121 608 4477