DCS LDT-M1 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DCS LDT-M1. DCS LDT-M1 15 pagina's.

Select the witness mark to edit on the WCU-4 display.

While keeping the SLIDE soft button pressed, drive the lens scale to the corresponding witness

mark.

Release the SLIDE soft button when lens mark and display mark match.

Snap Function

Use the SNAP soft button to correct a slight offset for a single data point. The snap function will

move the nearest available data point on the WCU-4 screen to the currently set lens position:

Drive the lens scale to a witness mark.

Press the SNAP soft button. The nearest available data point on the WCU-4 screen will jump to

the currently set position.

Press the RESET soft button to reset all editing actions.

Press the BACK soft button to apply all editing actions and return to the Select Axis screen.

Press the SAVE soft button to save the lens file to SD card folder /ARRI/ALEXA/LDA. You can

edit the lens name before saving.

Using a Lens Data Encoder

Usually camera operators like to have a manual control of zoom instead of controlling it by using

a motor. A lens encoder can be used instead in order to avoid the friction of a motor, allowing

the axis to spin free and be able to achieve valuable encoding data.

DCS have an own brand lens data encoder called LDT-E1, alternatively a Arri LDE-1 can be

used. Both of these solutions are plug and play, there is no need to create a new or separate

lens table when using either.

Note: On the LDT-M1 the Lens Data Encoder it can be used for the Zoom axis only. On

the LDT-E1, the physical button for selecting a bounding axis is disabled when

connected to the LDT-M1.

Note: the direction of the motor might need to be reversed: please go to the

the Motor Direction

Changing the Motors direction

LDT- M1 User Manual

chapter.

C hanging