DCS DishDrawer DD24SVT7 Handleiding voor installatie-instructies - Pagina 13

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} DCS DishDrawer DD24SVT7. DCS DishDrawer DD24SVT7 16 pagina's. Dishdrawer

Pagina afdrukken
REMOVE THE DRAWER
9b
1
Product may
move. Mark
chassis position
on cavity
2
3
Press the release tabs
in on either side and
push back to release
drawer from runners
REFIT THE DRAWER ONTO THE RUNNERS
11b
Ensure the drawer
is now rotated
clockwise back.
5
19
1
15
Ensure the release tabs on
both sides are reset fully.
4
To prevent kinked hoses, we recommend
rotating the drawer counter-clockwise and
resting it on its side after removal.
5
Push drawer runners back in.
17
3
4
18
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
2
16
SECURE THE DRAWER TO THE CABINETRY
10b
The product has three
pairs of fixing points:
Ensure the sound insulation is
repositioned correctly.
two pairs of formed
brackets on either
chassis side (use 5⁄8"
(16 mm) screws)
1
13
2
a pair of fixing
holes on the bottom
(use 1 ½ " (38 mm)
fixing screws &
washers)