HighPoint R1108 Series Snelle installatiehandleiding - Pagina 4
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint R1108 Series. HighPoint R1108 Series 10 pagina's. Replacing the thermal silicone
Ook voor HighPoint R1108 Series: Snelle installatiehandleiding (10 pagina's), Snelle installatiehandleiding (6 pagina's)
Pagina afdrukken
R1108 Hardware Installation:
Step 1. On the rear of the R1108, remove the six screws that secure the
unit's heat sink to the PCB.
Step 2. Carefully remove fan's power cable from the right-side of the
heatsink as shown below, then carefully flip the heatsink to the
left (like turning a page from a book).
Note: Take care when moving the heatsink to prevent damaging
the left fan's power cable.
4