HighPoint R1504 Snelle installatiehandleiding - Pagina 6
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint R1504. HighPoint R1504 7 pagina's. 4x m.2 port to pcie 4.0 x16 nvme hba
Ook voor HighPoint R1504: Snelle installatiehandleiding (7 pagina's)
Pagina afdrukken
The following example shows four PCIe Gen4 SSD installed into Port
1, 2, 3 & 4;
Step 7. Reattach the heat sink after installing all of the SSDs.
Step 8. On the rear of the R1504, refasten the 6 screws that were
removed in step 1.
Note
Make sure the aluminum cover is properly aligned with the
：
controller board (PCB), and that it makes full contact with the thermal
pad, before refastening it to the R1504. If the cover is improperly
installed, the fan and thermal pad will be unable to sufficiently cool the
NVMe SSD's and controller componentry, which may result in damage
to the SSD's or controller hardware, performance loss, unstable I/O,
and the loss of data.
Port1
Port2
Port3
Port4
6