HighPoint R1508 Snelle installatiehandleiding - Pagina 4

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint R1508. HighPoint R1508 11 pagina's. 8x m.2 port to pcie 4.0 x16 nvme hba
Ook voor HighPoint R1508: Snelle installatiehandleiding (6 pagina's), Snelle installatiehandleiding (11 pagina's)

Pagina afdrukken

R1508 Hardware Installation:

Step 1. On the rear of the R1508, remove the six screws that secure the

unit's heat sink to the PCB.

Step 2. Carefully remove the fan's power cable from the right-side of

the heatsink as shown below, then carefully flip the heatsink to the

left (like turning a page from a book).

Note: Take care when moving the heatsink to prevent damaging

the left fan's power cable.