HighPoint RR3720 Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HighPoint RR3720. HighPoint RR3720 15 pagina's. Pci-express 3.0 x8 raid controller
Ook voor HighPoint RR3720: Snelle installatiehandleiding (9 pagina's), Installatiehandleiding (15 pagina's)

HighPoint RR3720 Installatiehandleiding
Linux RHEL on RR3740/3720/2840/840/3742/710/720 Installation Guide

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/rr3740a /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/rr3740a /x
This command will show the driver version number, physical device list and logical device
list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to RR Series RAID controller. Installation of the
management software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.

5 Troubleshooting

If you do not install the system or update the kernel according to the installation manual, the
system will crash and you will not be able to enter. Please follow the steps below.
Choose "Red Hat Enterprise Linux(5.14.0-162.6.1.el9_1.x86_64)9.1." and enter the
a.
system
b.
Install Linux Opensource driver.
c.
Linux Opensource driver link, open the following link to enter the "Software Download"
page to download:
RR3700 Series:
RR2800 Series:
https://www.highpoint-tech.com/rr3700-overview
https://www.highpoint-tech.com/rr2800-overview
- 10 -