HighPoint SSD7104F Snelle installatiehandleiding - Pagina 7

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint SSD7104F. HighPoint SSD7104F 9 pagina's. 4x m.2 port to pcie 3.0x16 nvme raid controller

Pagina afdrukken

Step 7. Replace the heat sink after installing all SSDs

Step 8. On the rear of the SSD7104F, refasten the six screws that were

removed in step 1.

Note ：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7204. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD's and controller componentry, which may result in damage

to the SSD's or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note:

Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note:

Install the driver in the system first and then install the board!