HighPoint SSD7540 Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HighPoint SSD7540. HighPoint SSD7540 15 pagina's. Using nvme raid aics with the dell precision 3930 rack workstation
Ook voor HighPoint SSD7540: Snelle installatiehandleiding (9 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (16 pagina's), Snelle installatiehandleiding (11 pagina's), Installatiehandleiding (19 pagina's), Snelle installatiehandleiding (6 pagina's), Handmatig gebruiken (19 pagina's)

Step 3 - Creating the RAID Array

a. This procedure assumes you have already installed NVMe SSD's into the SSD7000

controller (please see Step 1- Prerequisites).

Note: Make sure your USB flash drive has been formatted using the FAT32 file systems.

b. Insert the bootable USB flash drive into the motherboard and boot the system.

c. The motherboard's BIOS post screen should display information about the NVMe

SSD's:

d. Enter the motherboard's BIOS settings, and select the UEFI: "flash drive" from

the menu:

e. At the prompt, enter the following command to change the resolution:

mode 160 53