Emerson Bettis RTS Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 7

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Emerson Bettis RTS. Emerson Bettis RTS 18 pagina's. Extension board for modbus rtu
Ook voor Emerson Bettis RTS: Servicehandleiding (18 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (16 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (18 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (16 pagina's)

Installation, Operation and Maintenance Manual

VCIOM-15590-EN Rev. 0

2.1.2

Connecting the PROFIBUS Cables

Recommended cable assembly

Before connecting the bus cable, it has to be assembled as follows:

The terminals on the terminal board are designed for a max. cross-section of up to 1.5 mm

The shield outside diameter has to be in the range of 5 - 8 mm.

Customer connection within the line

There are other PROFIBUS subscribers before and after the slave. Connection for the cables:

Figure 2

Figure 3

Connection

Single Channel

Dual Channel

Section 2: Connection

November 2021