Emerson Bettis RTS Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 7

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} Emerson Bettis RTS. Emerson Bettis RTS 18 pagina's. Extension board for modbus rtu
Ook voor Emerson Bettis RTS: Servicehandleiding (18 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (16 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (18 pagina's), Installatie-, Bedienings- en Onderhoudshandleiding (16 pagina's)

Pagina afdrukken
Emerson Bettis RTS Installatie-, Bedienings- en Onderhoudshandleiding
Installation, Operation and Maintenance Manual
VCIOM-16741-EN Rev. 0
2.1.2

Connecting to Modbus RTU

Recommended Cable Confectioning
Prior to connection the bus lines are to be confectioned as seen in the Figure 2 below:
Figure 2
The clamps on the connection board are designed for a maximum line cross-section of
1.5 mm
Connecting to a Strand between Devices
Other devices are connected to the bus in front and behind of the new Slave-Device.
Line configuration:
Figure 3
Connection
. The line diameter has to be in the range of 5 to 8 mm.
2
A. Single Channel
Section 2: Connection
November 2021
B. Dual Channel
3