Emerson FB2100 Handleiding veldvervanging - Pagina 3

Blader online of download pdf Handleiding veldvervanging voor {categorie_naam} Emerson FB2100. Emerson FB2100 16 pagina's. Flow computer i/o terminal board
Ook voor Emerson FB2100: Handleiding veldvervanging (16 pagina's), Handleiding veldvervanging (8 pagina's), Handleiding veldvervanging (14 pagina's), Handleiding veldvervanging (16 pagina's)

FB2100/FB2200 Flow Computer I/O Termination Board Field Replacement Guide

Replacing the I/O Termination Board

UL Field Installed Accessory Kit for Use in Class I, Division 2, Groups A, B, C, and D

You can replace the I/O termination board in the field provided that the replacement has the exact

same part and version.

Restrictions

Hazardous area approvals request that any part replaced in the field be the exact same part ("like-

for-like"). Upgrading or substituting different parts violates hazardous area certification.

Refer to the table below for the correct field replacement part number.

Item

Flow Computer I/O Termination Board Field Installed Accessory Kit

for use with UL Listed Model Series FB2100 and FB220

Required Tools



Electrical Ratings



Ambient Temperature Ranges:

May be used up to a maximum ambient temperature of 80°C and a minimum ambient

temperature of –40°C; refer to the data plate attached to the device for ambient temperature.

EXPLOSION HAZARD – Substitution of any components may impair suitability for Class I,

Division 2.

EXPLOSION HAZARD – Do not disconnect equipment unless power has been removed or the

area is known to the non-hazardous.

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.

Performing this operation in a hazardous area could result in an explosion.

#2 Phillips-head screwdriver

3/32-inch flat head screwdriver (For 3.81 mm pitch terminal block connections and

disconnecting the internal connector to the sensor)

Hexagonal torque wrenches with 3mm, #1, and #2 Phillips-head bits. Ranges must include 1

to 2 in-lbs (0.1 to 0.2 N-m), 4 to 6 in-lbs (0.5 to 0.7 N-m), and 10 to 12 in-lbs (.1 to 1.4 N-m).

Input Voltage: 10.5 Vdc to 30 Vdc external supply (Max power at 10 watts)

WARNING

DANGER

D301805X012

November 2020

Field Replacement Kit

Part Number

400210010-KIT