HighPoint Rocket 750 Snelle installatiehandleiding - Pagina 6

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} HighPoint Rocket 750. HighPoint Rocket 750 8 pagina's. 40-channel sata 6gb/s pci-express 2.0 x8 hba

Pagina afdrukken

I2C can monitor the speed of fan and temperature in the

enclosure.

BEEP1

Audible alarm – will sound if a disk fails or stops responding.

PORT1 to

These represent the Rocket 750's 10 Internal Mini-SAS ports.

PORT10

Each port can directly support up to 4 hard disks.

Active/FAIL LED PIN connector:

Active/Failed LED Pin Connectors

Two pins are provided for each of the Rocket 750's 40 device channels: one for

disk activity, and one for disk failure. For more information about LED

functionality and connection requirements, please refer to:

http://www.highpoint-tech.com/PDF/LED_connection.pdf

Hardware Installation

Installing the Rocket 750 HBA

Note: Make sure the system is powered-off before installing the

Rocket 750 HBA.

1. Open the system chassis and locate an unused PCI-E (2.0/1.0) (x8, x16) slot

or (3.0) (x16) slot.

2. Remove the PCI slot cover.

3. Gently insert the Rocket 750 HBA into the PCI-E slot, and secure the

bracket to the system chassis.

4. After installing the adapter, attach the hard disks or disk enclosure to the

Rocket 750 HBA using the appropriate data cables.

5. Close and secure the system chassis.

Using the Rocket 750 HBA

Rocket 750 HBA BIOS

After installing the Rocket 750, power on the system. The Rocket 750 BIOS

should post during the system's boot procedure. The BIOS does not include a