DDK CM10-SP10S-S(D6) Montagehandleiding - Pagina 7

Blader online of download pdf Montagehandleiding voor {categorie_naam} DDK CM10-SP10S-S(D6). DDK CM10-SP10S-S(D6) 12 pagina's. Plug connector cable

3-6. Tightening a back shell

(1) To prevent the straight back shell from loosening, coat 2 threads of the circumference of the straight back

shell with adhesive.

●

Recommended adhesive: 1401B (Three Bond Co., Ltd.)

(2) Rotate the back shell coupling of the connector and temporarily tighten the straight back shell.

* When tightening temporarily, match the concavity and convexity of the plug shell with those of the

angle back shell.

(You can confirm the correct connection of concavity and convexity waving lightly back shell just

before inserting to BS coupling.)

Back shell coupling

Straight back shell

Back shell coupling

Plug shell concavity and

convexity

Adhesive (to be coated to 2

threads of the circumference)

Temporarily

tighten

Back shell coupling

Plug shell

プラグシェル

Back shell concavity and

convexity

Material No.

Page

TC-605

6/11

Back shell

バックシェル

O K