Gallien-Krueger 200MV Gebruiksaanwijzing - Pagina 4
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Gallien-Krueger 200MV. Gallien-Krueger 200MV 6 pagina's.
Pagina afdrukken
200 MV Operating Instruction
Power Switch
The power switch on the 200MV is located on the rear panel
above the fuse holder.
Power Cord
The power cord is detachable and plugs into a socket located on
the rear panel. If a replacement cord is used or needed it should
be UL rated at 10amp, 125V; or if using 240V, the cord should
be UL rated at 5amp, 240V.
Fuse
The fuse holder is located on the rear panel. Never operate this
amplifier with any other than the recommended fuse type.
115V operation - type TSC3A
240V operation - type TSC2A
Maintenance
Your new amplifier is rugged. It was built to give you a life-
time of trouble free operation. If it is operated with care, your
only maintenance problems should be cleaning. We recommend
a soft, damp cloth and mild soap for cleaning the outside sur-
faces. A road case is advised for further protection from travel
and handling. If you should need service, please call us or your
local GK dealer to find out where the nearest certified GK
repair station is.
Sample Setups
OPTIONAL : YOU CAN ADD THE 7-BAND GRAPHIC AND ECHO TO THE
MON. SIGNAL FROM THE PA BOARD BY SENDING THE MONITOR SIG-
NAL INTO THE CH. 2 INPUT OF THE AUX. IN.
Specifications
Power @ 400Hz
100 Watts into 4 Ohms @ .1 THD
72 Watts into 8 Ohms @ .1% THD
Signal - to - noise Ratio :>80dB
Max Distortion :.35%
Frequency Response :Less than ± 1dB 20- 20K Hz
Line out :+ 1.6dBV (Nom)
Direct Outs - into 1K OHM Balanced input
CH. 1 = CH. 1 input Level
CH. 2 (Switch Out) = CH. 2 Input Level - 6dB
CH. 1 & 2 Post Effects (Switch In) - 20dBV (Nom)
Auxiliary Output :Equal to AUX. In 1 & 2 Levels
Channel 1 Input
Input Impedance - 5.6K OHM
Max input Level - 95mV RMS
W/-10dB Switch in - 300mV
Input Sensitivity - 2.4mV
Channel 2 Input
Input Impedance - 1M OHM
Max input level - 2.4V RMS
Input Sensitivity - 30mV
Auxiliary Input
Input Impedance - 1M OHM
Max input Level - .9V RMS
Input Sensitivity - 8mV