Gallien-Krueger Legacy 410 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gallien-Krueger Legacy 410. Gallien-Krueger Legacy 410 10 pagina's. Combo
Pagina afdrukken
LEGACY SERIES COMBO
Installation
To insure proper operation and to avoid
potential safety hazards, place the unit on a
firm, level surface.
Ventilation: Make certain that proper
space is provided for ventilation. Never
block the fan vent holes located at the back
of the amplifier. If the amplifier will be in
an enclosed area, make sure that there is at
least 8" clearance at the back panel for
sufficient air movement. Consult your
dealer for more information. Avoid
installation in extremely hot or cold
locations, and areas that are exposed to
direct sunlight, or near heating equipment.
Avoid
moist
or
Remember, power amplifiers generate heat.
The ventilation slots on the enclosure are
specifically designed to remove this heat.
Blocking or placing other electronic
equipment near the heat dissipation system
may possibly affect the long term reliability
of both your amplifier and the other
equipment.
Moving the Unit: Before moving the unit,
be certain to disconnect any cords
connected to other components, and make
sure that you disconnect the unit from the
AC outlet.
Cleaning: When the unit gets dirty, clean
only with a dry cloth. Never use benzene,
thinner, alcohol, or other volatile cleaning
agents. Do not use abrasive cleaners, as
they may damage the finish of metal parts.
Avoid spraying insecticides near the unit.
Maintenance: Your new amplifier is
rugged. It was built to give you a lifetime of
trouble free operation, if it is operated in
accordance with the instructions contained
in this manual. The only maintenance
required is cleaning. If you are going to
move your amplifier around frequently, we
recommend a road case to protect it from
scratches and road wear.
humid
locations.
Packaging: The carton and packing
materials used in shipping your new
amplifier were specifically designed to
cushion it from the shocks and vibration
that occur during transport. We suggest that
you save the carton and packing materials
for use in shipping, in the event you move,
or the amplifier needs repair.
9