AFL FLX380 Snelle referentiehandleiding - Pagina 16

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} AFL FLX380. AFL FLX380 18 pagina's.
Ook voor AFL FLX380: Snelle referentiehandleiding (16 pagina's)

Pagina afdrukken

Light Source and Power Meter Test Mode

Use

keys to navigate Light Source menu.

Use

keys to change Light Source menu items.

Turn laser On/Off.

Select test mode: CW, 270

Hz,330 Hz, 1 kHz and 2 kHz

tones, or Wave ID.

Select wavelength(s).

Press to toggle units:

• dB to measure loss,

• dBm or W to measure power

Hold to set OPM reference level. Press briefly to see current reference levels.

Wave ID Mode Feature

The Wave ID (automatic wavelength identification) feature significantly increases efficiency:

• Cuts test time in half (or more) by testing multiple wavelengths simultaneously.

• Eliminates user setup error and the need to coordinate manual setting of wavelengths by users located at

opposite ends of the fiber under test.

The "Wave ID" field A to the left of the displayed Power Meter wavelength will display one of the following:

• 270 Hz, 330 Hz, 1 kHz, 2 kHz, or Wave ID. If none of these are detected, this OPM field is blank.

• When Wave ID is displayed, Power or loss is measured and displayed for the automatically detected wavelengths.

• In other modes, the wavelength must be manually set but tone frequency is automatically detected.

source

meter

Light Source

settings

Power Meter

settings

Press to toggle

OPM wavelength.