CORA CS1060 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CORA CS1060. CORA CS1060 18 pagina's. Temperature & humidity sensor

Event Notifications and Reports

The CS1060 Sensor has six (6) configurable event triggers that can be used to monitor the

changing temperature and humidity conditions. When event thresholds are exceeded, the

Sensor uplinks a notification indicating the event and current temperature conditions. Using the

configuration messages for the device, the Sensor can report the following information:

⧫

Event Notifications – Triggered notifications based on evaluating sampled temperature

and humidity data.

Periodic Reports – Report samples of temperature and humidity data. Can configure

⧫

intervals from one minute to 44 days.

⧫

Periodic Statistics – Report temperature and humidity statistics at regular intervals from

one minute to 44 days.

Statistics reports provide:

⧫

Average values

⧫

Maximum/ Minimum values

⧫

Variances

⧫

Count of samples

Statistics are stored in non-volatile memory and will persist through a battery change or dead

battery. Both the statistic reporting and event notifications can be configured remotely by

sending downlink messages.

The sensor has a periodic Heartbeat / Battery-status message that is sent to maintain

LoRaWAN network connectivity and indicate battery status information. The period may be

configured between two (2) minutes minimum and 48 hours maximum.

FACTORY RESET uplink messages will be sent after rebooting.

The firmware information can be retrieved via sending a downlink command.

CS1060 Temperature & Humidity Sensor – User Guide

Page 10