Coral EVO 25 Handmatig - Pagina 7
Blader online of download pdf Handmatig voor {categorie_naam} Coral EVO 25. Coral EVO 25 12 pagina's. Evolution components
Pagina afdrukkenWIRING
Before starting connections, turn off car radio, amplifier and all electrical devices in your
audio system, in order to avoid possible damages.
Link the system components to the amplifier by using high quality speaker cables. Route
all wires through a protection grummet; don't put the cables close to electronic devices,
car wiring or heat-generating parts.
The wire gauge has to be adapted to the used power and to the cable length, as on
underneath table:
50 watt rms
100 watt rms
150 watt rms
Different wire gauge for woofer and tweeter can be used.
WOOFER MOUNTING
Check the mounting location carefully, to avoid that the woofer magnet does not interfere
with any electrical or mechanical devices.
Fix the woofers on a steady surface and, when it is possible, put a neoprene gasket
between them to eliminate air leakage. Installing high power and/or high quality audio
systems, damp the inside door's metallic and plastic surfaces by specific dumping material.
0÷2 meters
2
17 AWG / 1.1 mm
2
14 AWG / 2.2 mm
2
14 AWG / 2.2 mm
> 2 meters
2
14 AWG / 2.2 mm
2
14 AWG / 2.2 mm
2
12 AWG / 3.3 mm
7